4-4 Phaser 7750 Printer Service Manual
Jam Info No Static Jam Detected
or
Static Jam: area name
Location of Jam
<Press Back or Cancel to exit.>
Fault History <nnn> text: mmm <nnn>: is a service defined
numeric code, see "Service Usage
Profile Status Codes" on page A-5
for code definitions.
text is the fault description.
mmm: is the fault count. The
maximum fault count is 100 and
rolls to 1 on overflow. All count
values are 0 at power on.
Built-In Test Prints Prints pre-defined images stored in the engine firmware for
troubleshooting image-quality problems.
Paper Path Options For Print Laser, check only: Selects tray, count of/continuous sheets,
simplex/duplex, offset, media type/weight, finisher, staple.
Source tray: Tray 2-5,
Tray1/ MPT
Yes
No
Press Up/Down to change setting.
Current # sheets is n
Select new # sheets?
Yes
No
Press Up/Down to change the
number.
Press Info to shift column.
Simplex/Duplex:
Change Duplex setting?
Yes
No
Press Up/Down to change setting.
Offset: None, Auto, Front, Rear
Set a new offset?
Yes
No
Press Up/Down to change setting.
Media Type:
Set New Media Type?
Yes
No
Press Up/Down to change setting.
Output Destination
Change Output Setting?
Yes
No
Press Up/Down to change setting.
This option is only available with an
optional finisher installed.
Stapling is:
Set new stapling options?
Yes
No
Press Up/Down to change setting
This option is only available with an
optional finisher installed.
Test Front Panel Display Test Operation Definition
To Next Page
Loading...
