11-3
Finisher Specifications
Category Specification
Configuration User installed option. The finisher provides stapling (up to 50 sheets), print
job offset and stacking up to 1,000 sheets of paper. The finisher docks with
the printer and stand. All finisher operations are controlled by the finisher
control board.
Paper feed Paper leaving the exit section of the printer is fed to the paper catch area
then directly into the horizontal transport. The horizontal transport then
delivers the paper to the finisher where stapling, offsetting (jogging) and
stacking occur.
Power
requirements
The printer provides +24 VDC to the finisher. The finisher’s power supply
provides all required DC voltages throughout the finisher option.
The Phaser 7750 Light Finisher shall meet FCC part 15, subpart B, Class
A. CISPR22 Class A.
Dimensions:
shown in mm.
Media Types Long-Edge Feed (LEF) Short-Edge Feed (SEF)
B5 A3
A4 A4
Letter B4
8” x 10”
Letter
US Folio
Legal
Tabloid
Media Weight
64 - 105 g/m
2
(Thick/Thin paper)
To Next Page
Loading...
Need help?
General