11-26 Phaser 7750 Printer Service Manual
Paddle Shaft
1. Remove the rear, left and right covers, see page 11-17.
2. Remove the cam bracket assembly, see page 11-28.
3. Remove the staple unit, see page 11-29.
4. Remove the e-clips from both ends of the shaft.
5. Remove the gear and bushing from the front end of the shaft.
6. Remove the bushing from the front and slide out the shaft.
7. Remove the bushings and KL-clips from both ends.
8. Slide the shaft to the rear and slide out.
To Next Page
Loading...
