Print-Quality Troubleshooting 5-25
Print Is Mottled
The printed image has a mottled
appearance.
1. Ensure that the paper is in good
condition and appropriate for a laser
printer.
2. Ensure that the loaded media
matches the front panel settings.
Also check the media selected in the
printer driver.
3. Ensure supported media is being
used.
4. For specialty papers, experiment
with alternate paper type settings
such as Heavy Laser Paper,
Thick Cover/Index or others.
5. Run the Calibrate for Paper routine.
From the front panel’s Printer
Setup Menu, select Calibration
Setup, then select Calibrate for
Paper.
Note
Verify the settings. Be sure the setting is not at +4 value before running Calibrate
for Paper. Tray1 (MPT) must have the right setting to run calibrate for paper.
3041-53
To Next Page
Loading...
