EasyManuals Logo

Xerox 7750DXF - Phaser Color Laser Printer User Manual

Xerox 7750DXF - Phaser Color Laser Printer
505 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #206 background imageLoading...
Page #206 background image
6-18 Phaser 7750 Printer Service Manual
Resetting Paper Handling Defaults
Resetting the paper handling defaults resets the paper source, paper destination, job
offset, stapling options, print-quality mode, 2-sided printing, image smoothing and
TekColor corrections to their default values.
1. From the Main Menu, highlight Printer Setup and press OK.
2. Highlight Paper Handling Setup and press OK.
3. Highlight Reset Paper Handling Setup and press OK.
4. Highlight Reset Paper Handling Setup NOW and press OK to reset the paper
handling defaults.
Resetting Network Setup Values to Default
Resetting the network setup values resets the TCP/IP address, TCP/IP address menu
settings (gateway, broadcast, etc.), CentreWare IS, EtherTalk, NetWare, set IPX frame
type, IPP and Ethernet speed to their default values.
1. From the Main Menu, highlight Printer Setup and press OK.
2. Highlight Connection Setup and press OK.
3. Highlight Reset Connection Setup and press OK.
4. Reset Connection Setup NOW is displayed, press OK.
Resetting Belt Cleaner Assembly Life
Resetting the belt cleaner life is to be performed only if the belt cleaner assembly is
replaced before an end-of-life or near end-of- life message. Do not to extend the life
of the assembly. Doing so may cause premature failure of other internal printer
components.
The printer prompts the user to reset the life counts if the assembly is replaced after
receiving a Replace Belt Cleaner Assembly or Replace Belt Cleaner Assembly Soon
message.
1. From the Main Menu, highlight Information and press OK.
2. Highlight Supplies Info and press OK.
3. Highlight Reset Belt Cleaner Assembly Life and press OK.
4. Reset Reset Belt Cleaner Assembly Life NOW is displayed, press OK to reset
the Accumulator Belt Cleaner life.
Resetting Transfer Roller Life
Resetting the transfer roller life is to be performed only if the transfer roller assembly
is replaced before an end-of-life or near end-of-life message. Do not to extend the life
of the assembly. Doing so may cause premature failure of other internal printer
components.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Xerox 7750DXF - Phaser Color Laser Printer and is the answer not in the manual?

Xerox 7750DXF - Phaser Color Laser Printer Specifications

General IconGeneral
BrandXerox
Model7750DXF - Phaser Color Laser Printer
CategoryPrinter
LanguageEnglish

Related product manuals