YASKAWA DX200 - Page 122

8 System Setup
8.3 Tool Data Setting
8-35
182582-1CD
182582-1CD
MH900, DX200 Controller
3. Select the desired tool number.
– Move the cursor to the desired number in the tool list window and
press [SELECT].
– The tool coordinate window of the selected number is shown.
– In the tool coordinate window, the number can be changed by
pressing the [PAGE] or selecting [PAGE].
– To switch the tool list window and the tool coordinate window, press
{DISPLAY}  {LIST} or {DISPLAY}  {COORDINATE DATA}.
122 of 552