YASKAWA DX200 - 12.3.1 Base Axis Setting

12-17
182582-1CD
182582-1CD
12 Modification of System Configuration
12.3Addition of Base and Station Axes
MH900, DX200 Controller
12.3.1 Base Axis Setting
12.3.1.1 Selection of Base Axis Type
Select the type of base axis to be added/modified.
1. Turn ON the power supply again while pressing [MAIN MENU]
simultaneously.
2. Change the “SECURITY MODE” to the “MANAGEMENT MODE”.
3. Select {SYSTEM} under the main menu.
– The system window appears.
4. Select {SETUP}.
– The SETUP window appears.
– Note that the items marked with “” cannot be set.
445 of 552