YASKAWA DX200 - 8.12.3 Setting the Learning Function

8-116
182582-1CD
182582-1CD
8 System Setup
8.12Instruction Level Setting
MH900, DX200 Controller
8.12.3 Setting the Learning Function
The learning function is set at “VALID” by default.
1. Select {SETUP} under the main menu.
2. Select {TEACHIG COND}.
– The TEACHING CONDITION window appears.
3. Select “INSTRUCTION INPUT LEARNING”.
– “VALID” and “INVALID” are displayed alternately every time
[SELECT] is pressed.
203 of 552