YASKAWA DX200 - 8.14 Setting the Play Speed

8-118
182582-1CD
182582-1CD
8 System Setup
8.14Setting the Play Speed
MH900, DX200 Controller
8.14 Setting the Play Speed
1. Select {SETUP} under the main menu.
2. Select {SET SPEED}.
– The SPEED SET window is shown.
3. Press the [PAGE].
– When two or more manipulators and stations exist in the system,
use the [PAGE] to change the control group, or click on [PAGE] to
select the desired control group.
4. Select “JOINT” or “LNR/CIR”.
– The type of speed alternately changes from “JOINT” to “LNR/CIR”.
205 of 552