8 System Setup
8.26Axes Detachment Function
8-295
182582-1CD
182582-1CD
MH900, DX200 Controller
8.26 Axes Detachment Function
8.26.1 Outline
The axes detachment function is to invalid the connection of specific axes
by setting in maintenance mode. When the axes detachment function is
set, the system can be started without any alarm even if some axes are
not connected physically during setup or motor exchange.
8.26.2 Setting Maintenance Mode
Start the maintenance mode and set the security mode to the safety
mode. (Refer to chapter 8.25.1 .)
8.26.3 Setting Axes Detachment Function
Operator can set or modify the setting items for axes detachment function
in detail setting screen.
The specified parameters are to be set automatically according to the
setting contents in detail setting screen.
1. Select {SYSTEM} under the main menu.
– Sub menu is shown.
2. Select {SETUP}.
– Setting selection screen is shown.
To Next Page
Loading...
