YASKAWA DX200 - 8.18.2 Initializing Data File

8-140
182582-1CD
182582-1CD
8 System Setup
8.18File Initialization
MH900, DX200 Controller
6. Select {YES}.
– The job data is initialized.
8.18.2 Initializing Data File
1. Turn ON the power supply again while pressing [MAIN MENU]
simultaneously.
2. Change the security mode to the management mode.
3. Select {FILE} under the main menu.
4. Select {INITIALIZE}.
5. Select {FILE/GENERAL DATA}.
– The INITIALIZE window appears.
When JOB is initialized, the following files are reset at the
same time. Be careful when initializing JOB.
• User coordinates
• Memory play file
• Spot monitor data
• Variable data
• System definition parameter (S4D)
• Robot calibration data
Conveyor calibration data.
227 of 552