YASKAWA DX200 - 8.21.7 Setting of Preventive Maintenance for the Hardware

8-186
182582-1CD
182582-1CD
8 System Setup
8.21Preventive Maintenance Function
MH900, DX200 Controller
8.21.7 Setting of Preventive Maintenance for the Hardware
8.21.7.1 Setting of Replacement Time Display
1. Select {PM} in the main menu.
– The sub menu appears.
– * The operation icons on the main menu vary depending on the
system usage.
2. Select {PM (HARDWARE)}.
– Alarm signal setting and unit selection window appears.
273 of 552