YASKAWA DX200 - 10.3 Error Message

10-4
182582-1CD
182582-1CD
10 Upgrade Function
10.3Error Message
MH900, DX200 Controller
10.3 Error Message
If Error occurs while automatic upgrading, exercise the following
procedure.
• Turn on the main power supply of the controller.
– Automatic upgrade might be exercised again.
• In case error occurs during automatic upgrade process.
(1) Prepare CF for upgrading or USB memory.
(2) Press [2], [8] and [HIGH SPEED] at the same time.
-Upgrade of the OS of Programming Pendant
(3) Press [INTERLOCK], [8] and [SELECT] at the same time.
(4) Exercise manual upgrading.
-Refer to “DX200 Upgrade Procedure” (165560-1CD) for details.
423 of 552