YASKAWA DX200 - 5.2 Turning ON the Servo Power; 5.2.1 During Play Mode; 5.2.2 During Teach Mode

5-3
182582-1CD
182582-1CD
5 Turning ON and OFF the Power Supply
5.2 Turning ON the Servo Power
MH900, DX200 Controller
5.2 Turning ON the Servo Power
5.2.1 During Play Mode
Turning ON the safety plug, workers safety is secure.
• Close safeguards, press the [SERVO ON READY] button on the
programming pendant to turn ON the servo power supply. [SERVO
ON] lamp lights, when the servo power turns ON.
)
5.2.2 During Teach Mode
1. Press [SERVO ON READY] on the programming pendant to turn ON
the servo power supply. [SERVO ON] lamp will flicker when the servo
power is turned ON.
2. The servo power turns ON and [SERVO ON] lamp lights on the
programming pendant when the operator grips the Enable switch..
When the safeguarding is open, the servo power supply
cannot turn ON.
SERVO ON
READY
SERVO ON
Light
SERVO ON
READY
SERVO ON
Flicker
67 of 552