YASKAWA DX200 - 7.1.2 User ID

7-8
182582-1CD
182582-1CD
7 Security System
7.1 Protection Through Security Mode Settings
MH900, DX200 Controller
 Changing the Mode to One Time Management Mode
1. Change to MANAGEMENT MODE.
– When changing to the management mode, security mode is
selectable from “OPERATION MODE,” “EDITING MODE,”
“MANAGEMENT MODE,” “SAFETY MODE,” or “ONE TIME
MANAGE MODE”.
2. Select “ONE TIME MANAGE MODE”.
– A character string input keypad displays. Requires security code
from Yaskawa.
– If the password is correct, the security mode changes.
7.1.2 User ID
A request for a User ID occurs when operating in editing mode,
management mode, or safety mode.
• Editing Mode: user ID needs to be four or more but less than 16 or
less characters with number(s) and symbol(s).
• Management Mode: user ID needs to be four or more but less than
16 or less characters with number(s) and symbol(s).
• Safety Mode: user ID needs to be nine or more but less than 16 or
less characters with number(s) and symbol(s).
85 of 552