YASKAWA DX200 - Page 84

7 Security System
7.1 Protection Through Security Mode Settings
7-7
182582-1CD
182582-1CD
MH900, DX200 Controller
– Security mode allows the selection of “OPERATION MODE,”
“EDITING MODE,” “MANAGEMENT MODE,” or “SAFETY MODE.”
3. Select the security mode to change.
– Selecting a security mode lower than the current security level
requires a password.
4. Enter the password.
– The following user ID numbers are set as default.
Editing Mode: [0000000000000000]
Management Mode: [9999999999999999]
Safety Mode: [5555555555555555]
5. Press [ENTER].
– If the password is correct, the security mode will change.
84 of 552