10 Upgrade Function
10.1Functional Overview
10-1
182582-1CD
182582-1CD
MH900, DX200 Controller
10 Upgrade Function
10.1 Functional Overview
The controller applies two software for the CPU configuration: a software
for YCP21 (for the main CPU board) and a software for YPP (for
programming pendant). The system works only with the combination of
certain versions due to a compatibility problem of each software.
Therefore, with the system version NS3.00 and the subsequent versions,
the controller can upgrade the software for YPP if the combination of the
software for YCP21 and YPP is invalid.
10.2 Upgrade Procedure
10.2.1 Confirmation of Software Version
The compatibility of the versions of YCP21 and YPP are automatically
checked in 20 seconds after the controller power supply is turned on.
• In case the versions of YCP21 and YPP matches.
1. Automatic upgrade process completes and the communication
process between YCP21 and YPP is restarted.
2. Initial window appears approx. 45 seconds later.
To Next Page
Loading...
