8-114
182582-1CD
182582-1CD
8 System Setup
8.12Instruction Level Setting
MH900, DX200 Controller
8.12.1.2 Learning Function
When an instruction is entered from the instruction list, the additional
items that were entered last time are also shown. This function can
simplify instruction input.
To register the same additional items as those in the former operation,
register them without changing.
1. An instructions are registered.
2. The next time an attempt is made to register the same instruction as in
1, the same additional items as were registered last time are also
shown in the input buffer line.
8.12.2 Setting the Instruction Set Level
1. Select {SETUP} under the main menu.
2. Select {TEACHIG COND}.
– The TEACHING CONDITION window appears.
To Next Page
Loading...
