YASKAWA DX200 - 8.8.2 User Coordinate Setting

8-104
182582-1CD
182582-1CD
8 System Setup
8.8 User Coordinate Setting
MH900, DX200 Controller
8.8.2 User Coordinate Setting
8.8.2.1 Selecting the User Coordinate File
1. Select {ROBOT} under the main menu.
2. Select {USER COORDINATE}.
3. Select the user coordinate number.
(1) The USER COORDINATE window appears.
(2) The “” mark indicates that the user coordinates is completed to
set and the “” mark indicates that it is not completed.
(3) To check the position of the user coordinates select {DISPLAY} 
{COORDINATE DATA}.
(4) The following window appears.
191 of 552