YASKAWA DX200 - 9.3.3 Limiting the Automatic Backup File Creation

9 System Backup
9.3 Automatic Backup Function
9-26
182582-1CD
182582-1CD
MH900, DX200 Controller
9.3.3 Limiting the Automatic Backup File Creation
9.3.3.1 Setting to Limit the Automatic Backup File Creation
It is applicable from version DN1.60-00 to limit the backup file creation
executed by the automatic backup function to once a day.
To limit the backup file creation to once a day, set the following parameter.
Parameter number Contents Setting value
S0C682 Limits the backup file creation
executed by the automatic backup
function to once a day.
0 (Invalid)
1 (Valid)
When the automatic backup function is requested to start in
the state of limiting the automatic backup file to once a day,
an error occurs to notify that the backup has not been
processed.
To avoid the above error, set DISPLAY AT EMERGENCY to
“message”.
For the setting of DISPLAY AT EMERGENCY, refer to
chapter 9.3.2.6 “AUTO BACKUP SET Display” and
chapter 9.3.2.7 “AUTO BACKUP EXTENSION
FUNCTION SET Window” .
412 of 552