9-15
182582-1CD
182582-1CD
9 System Backup
9.3 Automatic Backup Function
MH900, DX200 Controller
9.3.2.6 AUTO BACKUP SET Display
Settings
Select the following items on the AUTO BACKUP SET display and set
values for the automatic backup.
• RESERVE TIME BACKUP (VALID/INVALID of the cyclic backup)
• BASE TIME
• BACKUP CYCLE
• RETRY CYCLE
• MODE CHANGE BACKUP (VALID/INVALID of the backup when
switching the mode from teach mode to play mode)
• STARTUP AUTO BACKUP (VALID/INVALID of the backup when the
controller is started up)
• SPECIFIC INPUT BACKUP (VALID/INVALID of the backup when
inputting specified signals)
• UNIV.OUT NO. ON ERROR
• DISPLAY AT EMERGENCY
• DURING ALARM OCCURRENCE
• STORED FILE SETTING (It is possible to set when CF:pendant is
set on the device.)
When the “CF: pendant” or “CF:Controller” is selected on
the auto backup display, the capacity of the CompactFlash
card in the specified device will be checked. Therefore, a
few seconds may be needed to open the setting window.
For the “CF: Pendant”, an error may occur without setting in
the CompactFlash card.
When changing the settings of “STORED FILE SETTING”
or executing “ARRANGE”, the files “CMOSBK.BIN” and
“CMOSBK??.BIN” (?? denotes figures) in the
CompactFlash card are changed in name or deleted. If a
certain file of this type is needed to be saved before
changed in name or deleted, evacuate it into a PC, etc.
beforehand.
While an error occurring, the setting of the each item on the
auto backup set display cannot be changed.
To Next Page
Loading...
