YASKAWA DX200 - 8.18.5 Initializing System Data

8-146
182582-1CD
182582-1CD
8 System Setup
8.18File Initialization
MH900, DX200 Controller
8.18.5 Initializing System Data
1. Turn ON the power supply again while pressing [MAIN MENU]
simultaneously.
2. Change the security mode to the management mode.
3. Select {FILE} under the main menu.
4. Select {INITIALIZE}.
5. Select {SYSTEM DATA}.
– The system data selection window appears.
6. Select the parameter to be initialized.
– The selected data is marked with ““.
– The system data marked with “” cannot be selected
233 of 552