YASKAWA DX200 - 11.3 Touch Panel Invalidate Function

11-4
182582-1CD
182582-1CD
11 Programming Pendant
11.3Touch Panel Invalidate Function
MH900, DX200 Controller
11.3 Touch Panel Invalidate Function
The touch panel invalidate function enables to invalidate the touch panel
operation of the programming pendant (key operation is still valid).
Even if the touch panel is failure, it is able to prevent the mis-operation by
using this function.
Operate the following procedures to valid/invalid the touch panel.
 Invalidate the Touch Panel
1. Push down the [INTER LOCK]+[AUX] keys at the same time.
The confirmation dialog to invalidate the touch panel appears.
2. Move the focus area over the “YES” on the confirmation dialog by
using [←] key.
3. Press [Select] key. The touch panel becomes invalid.
When the touch panel is invalid, an icon, which shows the invalidating
the touch panel, is displayed on the status area, and the message
“Touch operation is invalid” is displayed on the message area.
427 of 552