YASKAWA DX200 - 3.1.2 Using a Forklift to Move the Controller

3 Installation
3.1 Handling Procedure
3-2
182582-1CD
182582-1CD
MH900, DX200 Controller
3.1.2 Using a Forklift to Move the Controller
Observe the following precautions when using a forklift to handle the
controller:
• Ensure installation site is a safe work environment.
• Make sure of transportation of controller to installation location is
possible.
• Before moving equipment let people know equipment will be moving
in their area.
• Make sure controller cannot shift or fall during handling.
• Transport the controller at the lowest possible height.
• Avoid jarring, dropping, or hitting the controller during handling.
• When moving the controller, make sure to move at a safe speed.
Protective padding
Palette
Forklift
Tiedown straps
42 of 552