YASKAWA DX200 - 8.18.3 Initializing Parameter File

8-142
182582-1CD
182582-1CD
8 System Setup
8.18File Initialization
MH900, DX200 Controller
8.18.3 Initializing Parameter File
1. Turn ON the power supply again while pressing [MAIN MENU]
simultaneously.
2. Change the security mode to the management mode.
3. Select {FILE} under the main menu.
4. Select {INITIALIZE}.
5. Select {PARAMETER}.
– The parameter selection window appears.
6. Select the parameter to be initialized.
– The selected parameter is marked with ““.
– The parameters marked with “” cannot be selected.
229 of 552