YASKAWA DX200 - 3 Installation; 3.1 Handling Procedure; 3.1.1 Using a Crane to Move the Controller

3-1
182582-1CD
182582-1CD
3 Installation
3.1 Handling Procedure
MH900, DX200 Controller
3 Installation
3.1 Handling Procedure
3.1.1 Using a Crane to Move the Controller
Check the following before handling the controller:
• Confirm the weight of the controller before handling, and use a wire
rope with a rating that is greater than the weight of the controller.
• Install and securely fasten the eye bolts before lifting the controller.
• Authorized personnel are to operate the crane, sling, and forklift
only.
Failure to observe this caution may result in injury or damage.
• Avoid jarring, dropping, or hitting the controller during handling.
Excessive vibration or impacting the controller may adversely affect the
performance of the controller.
DX200
Wire Rope
M12 Eye bolt 4
Table 3-1: Approx. Weight of Controller
Models Available for
Controller
Approx.
Weight (Kg)
MH900 model 500
41 of 552