YASKAWA DX200 - 12.3.2 Station Axis Setting

12-29
182582-1CD
182582-1CD
12 Modification of System Configuration
12.3Addition of Base and Station Axes
MH900, DX200 Controller
12.3.2 Station Axis Setting
12.3.2.1 Selection of Station Axis Type
Select the type of station axis to be added/modified.
1. Confirm the type of control group in CONTROL GROUP window.
– The CONTROL GROUP window appears.
2. Select the type of control group to be modified.
– The MACHINE LIST window appears.
TURN-1: TURN 1 AXIS STATION
TURN-2: TURN 2 AXIS STATION
UNIV-1: UNIVERSAL 1 AXIS STATION
UNIV-2: UNIVERSAL 2 AXIS STATION
...
457 of 552