12 Modification of System Configuration
12.3Addition of Base and Station Axes
12-28
182582-1CD
182582-1CD
MH900, DX200 Controller
4. Press [ENTER] in the MOTOR SPEC window.
– After the setting, the current window moves to the window for the
next axis setting. Complete the settings for all axes in the same
manner.
– When [ENTER] is pressed in the MOTOR SPEC window for the last
axis, the setting in the MOTOR SPEC window is completed and the
confirmation dialog box appears.
– If {YES} is selected, the system parameter is set automatically.
5. Initialize the related files.
– To add and modify the base axis in completed.
To Next Page
Loading...
