YASKAWA DX200 - 14.1 Power ON Unit (JZRCR-YPU71-☐)

14-4
182582-1CD
182582-1CD
14 Description of Units and Circuit Boards
14.1Power ON Unit (JZRCR-YPU71-ჱ)
MH900, DX200 Controller
14.1 Power ON Unit (JZRCR-YPU71- ჱ )
The power ON unit consists of the power ON control circuit board
(JARCR-YPC21-1) and the main circuit contactor and the line filter. It turns
the main circuit control contactor ON and OFF using the signal for the
servo power control from the machine safety I/O logic circuit board, and
supplies power(3-phase AC200/220V) to the converter.
The power supply (single phase AC200/220V) is supplied to the control
power ON unit via the line filter.
Fig. 14-1: Power ON unit Configuration (JZRCR-YPU71- ჱ )
(CN603,CN604, CN605)
AC control power
supply connectors
(3FU),(4FU)
Fuse for
A
C cooling fan
GP25(2.5A 250V
(1FU),(2FU)
Fuse for AC control
power supply
0215010MXP
(10A 250V)
(CN607)
Contactor control
input connectors
(CN606)
AC cooling fan connectors
(CN608)
Brake interlock
output connectors
479 of 552