YASKAWA DX200 - 8.17 Changing the Parameter Setting

8-136
182582-1CD
182582-1CD
8 System Setup
8.17Changing the Parameter Setting
MH900, DX200 Controller
8.17 Changing the Parameter Setting
The parameter settings can be changed only by the operator who has the
correct user ID number for the management mode.
1. Select {PARAMETER} under the main menu.
2. Select the parameter type.
– The PARAMETER window appears. Select the desired parameter.
3. Move the cursor to the desired parameter number.
– When the desired parameter number is not in the current window,
move the cursor in the following way:
Decimal Data
Binary Data
223 of 552