YASKAWA DX200 - 13.1 Specification List

13 DX200 Specification
13.1Specification List
13-3
182582-1CD
182582-1CD
MH900, DX200 Controller
13.1 Specification List
Controller Dust/Splash-proof
Construction
IP54 (The back fan is IP2X.)
Dimensions 1935(W)  730(H) 520(D) mm
Cooling System Indirect cooling
Power Supply 3-phase,
200V/220V AC (+10% to -15%) at
60Hz(2%)
200V AC (+10% to -15%) at 50Hz(2%)
Grounding Grounding resistance: 100 or less
Exclusive grounding
Noise Level Less than 62 dB
Digital I/O Specific signal (hardware)
25 inputs and 7 outputs
General signals (standard, max.)
40 inputs and 40 outputs
(Transistor: 32 outputs, Relay: 8 outputs)
Positioning System By serial communication
(absolute encoder)
Drive Unit SERVOPACK for AC servomotors
Acceleration/
Deceleration
Software servo control
Memory Capacity 200,000 steps, 10,000 instructions
Ambient
Conditions
Ambient
Temperature
0C to + 45C (During operation)
-10C to + 60C
(During transit and storage)
Relative Humidity 10% to 90%RH (non-condensing)
Vibration
Acceleration
0.5G or less
Others Free from corrosive gas or liquid, or
explosive gas
Free from exposure to water, oil, or dust
Free from excessive electrical noise
(plasma)
470 of 552