YASKAWA DX200 - 8.23.5 Saving or Loading the File

8-266
182582-1CD
182582-1CD
8 System Setup
8.23Safety Logic Circuit
MH900, DX200 Controller
8.23.5 Saving or Loading the File
8.23.5.1 Saving the File
In order to save the file, which is set in the safety logic circuit, select {I/O
DATA} by going to {SAVE} from {EX. MEMORY} in the main menu.
Perform the saving the file after confirming the either the CompactFlash or
USB memory stick is inserting to the programming pendant.
1. Displaying the window.
– Select {I/O DATA}, by going to {SAVE} from {EX. MEMORY} in the
main menu.
– The signal list relative to the I/O data is displayed, and then select
“YSF LOGIC FILE”.
– The confirmation dialog appears, and select “YES”.
– The safety logic circuit file (file name:YSFLOGIC.DAT) is saved in
the specified device.
353 of 552