YASKAWA DX200 - Page 354

8 System Setup
8.23Safety Logic Circuit
8-267
182582-1CD
182582-1CD
MH900, DX200 Controller
8.23.5.2 Loading the File
In order to load the safety logic circuit file (file name: YSFLOGIC.DAT),
select {I/O DATA} by going to {LOAD} from {EX. MEMORY} in the main
menu. Perform the saving the file after confirming the either the
CompactFlash or USB memory stick is inserting to the programming
pendant.
1. Displaying the window.
– Select {I/O DATA}, by going to {LOAD} from {EX. MEMORY} in the
main menu.
– The signal list relative to the I/O data is displayed, and then select
“YSF LOGIC FILE”.
– The confirmation dialog appears, and select “YES”.
– The safety logic circuit file (file name:YSFLOGIC.DAT) is loaded
from the specified device.
354 of 552