YASKAWA DX200 - 8.21.4 Record of the Inspection Day ∙ the Replacement Day

8 System Setup
8.21Preventive Maintenance Function
8-181
182582-1CD
182582-1CD
MH900, DX200 Controller
ཱ =INTERVAL
The inspection interval is displayed.
8.21.4 Record of the Inspection Day ෬ the Replacement Day
Able to confirm the inspection day and the replacement day by following
procedures.
1. Select {=RM} in the main menu.
2. Select {=INSPECTION RECORD}.
3. Select {Display}, and select {=INSPECTION DATE} in the pull down
menu.
– Able to confirm the inspection day.
4. Select {Display}, and select {=REPLACEMENT DATE} in the pull down
menu.
– Able to confirm the replacement day.
When the inspection signal is turned ON or the message is
displayed, perform the inspection by an authorized
personnel or the Yaskawa representative (listed on the
back cover of this instruction manual). The message is
displayed continuously until the controller is inspected.
268 of 552