9 System Backup
9.3 Automatic Backup Function
9-20
182582-1CD
182582-1CD
MH900, DX200 Controller
9.3.2.7 AUTO BACKUP EXTENSION FUNCTION SET Window
Settings
Automatic backup setting is performed by setting the following items on
the AUTO BACKUP SET window:
• RESERVE TIME BACKUP
(Setting for performing the backup on what day of the week, every
day, or in a specific cycle)
• BASE TIME
• BACKUP CYCLE
• RETRY CYCLE
• MODE CHANGE BACKUP
(VALID/INVALID of the backup when switching the mode from the
teach mode to the play mode)
• STARTUP AUTO BACKUP
(VALID/INVALID of the backup when the controller is started up)
• SPECIFIC INPUT BACKUP
(VALID/INVALID of the backup when inputting specified signals)
• UNIV.OUT NO. ON ERROR
• DISPLAY AT EMERGENCY
• DURING ALARM OCCURRENCE
• DEVICE
(Setting of the device to store the automatic backup file)
• STORED FILE SETTING
(It is possible to set when “CF:Pendant” is set in DEVICE.)
When the “CF: pendant” or “CF:Controller” is selected on
the auto backup display, the capacity of the CompactFlash
card in the specified device will be checked. Therefore, a
few seconds may be needed to open the setting window.
For the “CF: Pendant”, an error may occur without setting in
the CompactFlash card.
When changing the settings of “STORED FILE SETTING”
or executing “ARRANGE”, the files “CMOSBK.BIN” and
“CMOSBK??.BIN” (?? denotes figures) in the
CompactFlash card are changed in name or deleted. If a
certain file of this type is needed to be saved before
changed in name or deleted, evacuate it into a PC, etc.
beforehand.
While an error occurring, the setting of the each item on the
auto backup set display cannot be changed.
To Next Page
Loading...
