YASKAWA DX200 - Page 407

9-21
182582-1CD
182582-1CD
9 System Backup
9.3 Automatic Backup Function
MH900, DX200 Controller
1. Turn ON the controller.
– Insert the CompactFlash to the programming pendant, when the
backup is set on the CompactFlash of the programming pendant.
2. Change the security mode to the management or higher mode.
3. Select {PARAMETER} in the main menu.
4. Select {S2C}.
– The parameter setting window appears. Set the value of S2C737 to “1”.
5. Select {SETUP} under the main menu.
6. Select {AUTO BACKUP SET}.
– The AUTO BACKUP SET display appears.
A. RESERVE TIME BACKUP
Pressing [SELECT] displays the following list. Select the item from “SET
CYCLE”, “EVERY DAY”, or the day of the week (“MONDAY” to “SUN-
DAY”).
Please note that after setting the base time, the backup cycle, and the
retry cycle, select the item from “SET CYCLE”, “EVERY DAY”, or the
day of the week (“MONDAY” to “SUNDAY”).
If “SET CYCLE”, “EVERY DAY”, or the day of the week (“MONDAY” to
“SUNDAY”) is set before setting one of the base time, the backup cycle,
and the retry cycle, “INVALID” is selected for RESERVE TIME
BACKUP.
A
D
B
C
E
H
F
G
I
L
J
K
N
M
O
407 of 552