YASKAWA DX200 - Page 408

9 System Backup
9.3 Automatic Backup Function
9-22
182582-1CD
182582-1CD
MH900, DX200 Controller
“INVALID” : RESERVE TIME BACKUP is not performed.
“SET CYCLE” : The automatic backup is performed every
BACKUP CYCLE based on the specified
BASE TIME.
“EVERY DAY” : The automatic backup is performed at the
specified BASE TIME every day.
“MONDAY” to “SUNDAY” : The automatic backup is performed at the
specified BASE TIME every week.
– Setting example for the automatic backup at 11:29 every day
– Setting example for the automatic backup at 11:29 on every
Thursday
B. BASE TIME
Specify the reference time to start the automatic backup.
The reference time ranges from 0:00 to 23:59.
C. BACKUP CYCLE
Specify the backup cycle to perform the cyclic back up.
Set the backup cycle in units of minutes. The cycle setting ranges from
10 to 9999 minutes. After the first backup, the following backups are
performed automatically in every BACKUP CYCLE.
When “EVERY DAY” or the day of the week (“MONDAY” to “SUNDAY”)
for RESERVE TIME BACKUP is selected, BACKUP CYCLE cannot be
input.
408 of 552