12 Modification of System Configuration
12.3Addition of Base and Station Axes
12-18
182582-1CD
182582-1CD
MH900, DX200 Controller
5. Select {CONTROL GROUP}.
– The current control group type is displayed.
6. Move the cursor to the type of control group to be modified, and press
[SELECT].
– The MACHINE LIST window is displayed.
RECT-X: traverse X-axis base
RECT-Y: traverse Y-axis base
RECT-Z: traverse Z-axis base
RECT-XZ: traverse XZ-axis base
RECT-XY: traverse XY-axis base
RECT-XYZ: traverse XYZ-axis base
(See the figures on the next page)
To Next Page
Loading...
