8-54
182582-1CD
182582-1CD
8 System Setup
8.5 Work Home Position
MH900, DX200 Controller
– When two or more manipulators exist in the system, use the [PAGE]
to change the control group, or click on [PAGE] to select the desired
control group.
8.5.2.2 Registering/Changing the Work Home Position
1. Press the axis keys in the work home position display.
– Move the manipulator to the new work home position.
2. Press [MODIFY], [ENTER].
– New work home position is set.
To Next Page
Loading...
