YASKAWA DX200 - Page 152

8 System Setup
8.6 Interference Area
8-65
182582-1CD
182582-1CD
MH900, DX200 Controller
 Teaching Corner
1. Select “METHOD”.
(1) Each time [SELECT] is pressed, “MAX/MIN” and “CENTER POS”
switch alternately.
(2) Select “MAX/MIN”.
2. Press [MODIFY].
– A message “Teach max./min. position” appears.
3. Move the cursor to “<MAX>” or “<MIN>.”
– Move the cursor to “<MAX>” when changing the maximum value,
and move cursor to “<MIN>” when changing the minimum value.
The cursor only moves to either “<MIN>” or “<MAX>” at this time.
4. Move the manipulator using the axis keys.
– Move the manipulator to the maximum or minimum position of the
cube using the axis keys.
5. Press [ENTER].
152 of 552