YASKAWA DX200 - Page 196

8 System Setup
8.9 Overrun/Tool Shock Sensor Releasing
8-109
182582-1CD
182582-1CD
MH900, DX200 Controller
– If “RELEASE” is selected, overrun or tool shock sensor is released
and “CANCEL” indication will be displayed.
4. Select “ALM RST”.
– The alarm is reset and manipulator can be moved with the axis
keys.
After releasing the overrun or tool shock sensor, if
“CANCEL” is selected or the window is changed to the other
one, the release of the overrun or tool shock sensor will be
canceled.
196 of 552