8 System Setup
8.15Numeric Key Customize Function
8-125
182582-1CD
182582-1CD
MH900, DX200 Controller
5. Open the window for allocation.
6. Press [INTERLOCK] and the allocated key at the same time.
– A message “Reserved display registered” appears, and the window
is registered.
– In this case, the CURRENT POSITION window is registered by
pressing [INTERLOCK] + [0] with the CURRENT POSITION window
displayed on the screen.
8.15.2.7 Alternate Output Allocation
Set this function in the KEY ALLOCATION (SIM) window.
1. Move the cursor to the “FUNCTION” of the key to be allocated and
press [SELECT].
– Selection list appears.
When allocate the display allocation to a key, key allocation
(SIM) will be set to the display set.
Unable to allocate the display allocation and the another
function to the same key.
To Next Page
Loading...
