YASKAWA DX200 - Page 237

8-150
182582-1CD
182582-1CD
8 System Setup
8.19Display Setting Function
MH900, DX200 Controller
 To set the font size in the font size setting dialog box, follow the
procedure below.
1. Specify the font style.
– The {Bold Type} check box can be checked or unchecked
alternately each time the check box is selected.
• Check the {Bold Type} check box as follows to set the font to the bold
style.
• Clear the {Bold Type} check box as follows to set the font to the
regular style.
2. Specify the font size.
– Select a button from the four buttons in the dialog box.
237 of 552