YASKAWA DX200 - Page 241

8-154
182582-1CD
182582-1CD
8 System Setup
8.19Display Setting Function
MH900, DX200 Controller
 To set the button size in the button size setting dialog box, follow the
procedure below.
1. Specify the area to set the button size.
(1) Select the desired area from the area setting buttons.
(2) The buttons in the selected area is subject to size setting.
(3) Note that only the last-selected button determines the area subject
to size setting, even if settings are performed several times before
then.
2. Specify the font style.
– The {Bold Type} check box can be checked or unchecked
alternately each time the check box is selected.
• Check the {Bold Type} check box as follows to set the font to the bold
style.
• Clear the {Bold Type} check box as follows to set the font to the
regular style.
241 of 552