YASKAWA DX200 - Page 270

8 System Setup
8.21Preventive Maintenance Function
8-183
182582-1CD
182582-1CD
MH900, DX200 Controller
3. Select the {System data}.
– The system data selection window appears.
(The following is an example of a window.)
4. Select the system data to load or save.
– For the speed reducer preventive maintenance data base, select
“={PM(REDUCER)FILE}”.
– For the speed reducer preventive maintenance condition, select
“={PM(REDUCER)CONDITION}”.
– For the record of the inspection and replacement date,
select”={INSPECTION RECORD FILE}”.
The selected system data is displayed with “ ღ ”.
5. Press “Enter”.
– The confirmation dialog appears.
6. Select “Yes”.
– The selected system data is saved.
270 of 552