YASKAWA DX200 - Page 280

8 System Setup
8.21Preventive Maintenance Function
8-193
182582-1CD
182582-1CD
MH900, DX200 Controller
8.21.8.3 Resetting the Number of Revolution
Used when the motor replaced with a new one.
1. Select “” of the axis to be reset by moving the cursor to it, and then
select “YES” on the dialog box.
The day of the first use (BEGINNING) is automatically changed.
8.21.8.4 Changing the Numbers of Revolution and Reverse Revolution
Used when the motor replaced with an used one.
1. Select the number of the axis to be reset by moving the cursor to it,
and then set the number.
To set the day of the first use (BEGINNING), select the date of the axis
to be reset by moving the cursor to it, and then set the date.
280 of 552