YASKAWA DX200 - Page 298

8 System Setup
8.23Safety Logic Circuit
8-211
182582-1CD
182582-1CD
MH900, DX200 Controller
3. Canceling the edit
– To start over the editing, select {CANCEL EDIT} from {EDIT} in the
pull-down menu.
4. Transferring or updating the file
– After editing, select {WRITE} button.
The file is transferred to the machine safety circuit board
(type:YSF21-E). When the file transfer is done correctly, the
confirmation dialog “Update the file?” appears.
298 of 552