iii
182582-1CD
182582-1CD
Safety
Summary of Warning Information
MH900, DX200 Controller
Summary of Warning Information
This manual is provided to help users establish safe conditions for
operating the equipment. Specific considerations and precautions are also
described in the manual, but appear in the form of Dangers, Warnings,
Cautions, and Notice.
It is important that users operate the equipment in accordance with this
instruction manual and any additional information which may be provided
by Yaskawa. Address any questions regarding the safe and proper
operation of the equipment to Yaskawa Customer Support.
Notes for Safe Operation
Read this manual carefully before installation, operation, maintenance, or
inspection of the MH900, DX200 Controller.
In this manual, the Notes for Safe Operation are classified as “DANGER”,
“WARNING”, “CAUTION”, or “NOTICE”.
Even items described as “CAUTION” may result in a serious accident in
some situations.
DANGER
Indicates an imminently hazardous
situation which, if not avoided, will result in
death or serious injury. Safety Signs
identified by the signal word DANGER
should be used sparingly and only for
those situations presenting the most
serious hazards.
WARNING
Indicates a potentially hazardous situation
which, if not avoided, will result in death or
serious injury. Hazards identified by the
signal word WARNING present a lesser
degree of risk of injury or death than those
identified by the signal word DANGER.
Indicates a hazardous situation, which if
not avoided, could result in minor or
moderate injury. It may also be used
without the safety alert symbol as an
alternative to “NOTICE”.
To ensure safe and efficient operation at all times, be sure
to follow all instructions, even if not designated as
“DANGER”, “WARNING” and “CAUTION”.
Safety
To Next Page
Loading...
