YASKAWA DX200 - Page 300

8 System Setup
8.23Safety Logic Circuit
8-213
182582-1CD
182582-1CD
MH900, DX200 Controller
8.23.2.5 Safety Logic Circuit
1. Displaying the window.
– Select {SAFETY LOGIC CIRCUIT} from {SAFETY FUNC.} in the
main menu.
2. Set up the safety logic circuit
– Create the safety logic circuit. The setting items are “INPUT1”,
“LOGIC”, “INPUT2”, “OUTPUT” and “TIMER”.
– The SIGNAL1 and SIGNAL2 must be set.
– When setting the signal 1 or the signal 2, LOGIC also must to be set.
– OUTPUT also must be set. The same output signal cannot be set to
the multiple logic circuit.
300 of 552