YASKAWA DX200 - Page 320

8 System Setup
8.23Safety Logic Circuit
8-233
182582-1CD
182582-1CD
MH900, DX200 Controller
8.23.4.4 Adding Input and Output Signals and Instructions in Safety Logic Circuit
Expansion Function
The following is the explanation of the expanded input and output signals
and logic (instructions) available in the safety logic circuit.
1. Logic
ᇲ : Already supported in the standard function ●: Additional instruction
4. Timer
3. Output signal
2. Input signal1. Logic
No. Display Contents Standard Expansion Function Note
Safety
Field Bus
Disabled
Safety
Field Bus
Enabled
1 NOT Negative
ᇲᇲᇲ
2 DSU Detection of signal rising edge -
●●
3 DSD Detection of signal falling edge -
●●
4 AND Logic AND
ᇲᇲᇲ
5 OR Logic OR
ᇲᇲᇲ
320 of 552